The advanced digital control panel LCA85, equipping CROSS 18EP and CROSS 18VEP, allows to manage perfectly the stroke of the gate in all its phases. Thanks to an innovative proprietary system of constant position control (Ditec Virtual Encoder), the position is perfectly estimated with precision and safety.
230 Vac electronics guarantees maximum performances even under adverse conditions, through a stronger dynamic thrust during the initial phase of operation.
CROSS 20VEI is equipped with 230 Vac 50/60 Hz inverter technology control panel. The use of the inverter guarantees more power and torque to manage the three-phase motor in all the stroke phases. The hardware of the gate is preserved thanks to the possibility of managing acceleration and deceleration ramps, opening and closing speed, easily configurable from the display.
RELIABLE and STURDY
lubricating grease suitable for temperatures ranging from -35°C to +55°C
steel worm screw
irreversible gear motor to avoid installation of electro-mechanical locks
Safety-Test function
electric brake and electronic clutch to guarantee irreversibility and precise stopping points
key-protected handle release system for manual opening and closing of the gate in the case of a blackout
vertical levelling screws and horizontal adjustment slots to adjust the automation system to the surface below and the gate rack.
LCA85 control panel for a perfect motion control
Wizard menu (Wizard WZ), to configure the control panel quickly and simply
more than 100 parameters adjustable, using the display and the navigation buttons
energy saving mode which limits stand-by consumption by disconnecting accessories
integrated diagnostics with counters and recent alarms log
advanced maneuver management and force adjustment
adjustable obstacle thrust force sensitivity
automatic ramp adjustment: in low temperature conditions
safety device test
2 dedicated inputs for selftesting resistive active safety edges (8.2 kΩ)
separate power outputs for 24 Vac and 24 Vdc accessories
2 configurable 24 Vdc outputs for accessories
heavy traffic function
Inverter LCU43 control panel, powerful and fast automation
thanks to the Ditec Virtual Encoder, the position of the gate is constantly estimated
high speed: 30 cm/s for gates up to 2000 Kg in compliance with all the current standards
over-temperature protection for board and motor
energy saving mode which limits stand-by consumption by disconnecting accessories
2 dedicated inputs for selftesting resistive active safety edges (8.2 kΩ)
Power Boost function: the control panel automatically adjusts to provide more thrust
dedicated terminal for master/slave configuration for synchronized control of double or interlocked automation
integrated diagnostics with counters and recent alarms log
advanced diagnostics: events log can be stored on a MicroSD card and analysed via Ditec Amigo software (free)
FULL COMPLIANCE WITH EU DIRECTIVES AND STANDARDS